Montana State University

Michael Berry

 

Mike Berry


Contact

Department of Civil Engineering
Montana State University
224 Cobleigh Hall
(406) 994-1566
berry@ce.montana.edu

Education

Ph.D. Structural Mechanics University of Washington 2006
M.S. Structural Mechanics University of Washington 2002
B.A. Mathematics (Concentration in Engineering) Carroll College, Montana 2000

Research Interests

Reinforced concrete behavior and design
Earthquake Engineering
Use of alternative (recycled) materials in structural application
Effect of cold on structural behavior and durability

Employment History

Assistant Professor, Montana State University, Bozeman; Aug. 2011 - Present

Research Assistant Professor, Montana State University, Bozeman; Jan. 2007 - Aug. 2011

Graduate Research Assistant, University of Washington, Seattle; Oct. 2001 - Dec. 2006

Structural Engineer, Morrison and Maierle, Helena, MT; May 2000 - Oct. 2001

Publications

Refereed Journal Articles

Roskos, C., Berry, M. Stephens, J. “Identification and Verification of Self-Cementing Fly Ash Binders
for Green Concrete”, ASCE Journal of Materials in Civil Engineering, submitted, December 2011.

Berry, M., Stephens, J., and Cross D. (2011), “Performance of 100 percent Fly Ash Concrete with
Recycled Glass Aggregate”, ACI Materials Journal, 2011, 108(4) .

Shi, X., Fay, L., Peterson, M., Berry, M., and Mooney, M. (2011), “An FESEM/EDX Investigation Into
How Continuous Deicer Exposure Affects the Chemistry of Portland Cement Concrete”, Construction
and Building Materials, 2011, 25(2), 957-966.

Shi, X., Liu, Y., Mooney, M., Berry, M., Hubbard, B., Nguyen, T.A. (2010) “Laboratory Investigation
and Neural Networks Modeling of Deicer Ingress into Portland Cement Concrete and Its Corrosion
Implications.”, Corrosion Reviews 2010, 28(3-4), 105-153.

Berry, M., Lehman, D. and Lowes, L. (2008) “Calibration of a Fiber-Hinge Model for Performance
Based Design of Bridge Columns,” ACI Structural Journal, Vol. 105, No. 3, pp 270-279, May-June
2008.

Berry, M.P. and Eberhard, M.O. “A Practical Performance Model for Bar Buckling,” ASCE Journal of Structural Engineering, Vol. 131, No. 7, pp 1060-1070, July 2005.

 

Conference Papers

Kappes, L., Berry, M., and Stephens, J., (2012), “Concrete Filled Steel Tube Piles to Concrete Pile-Cap
Connections”, Proceedings ASCE/SEI Structures Congress, Chicago, ILL, March, 2012.

White, T., Roskos, C., Berry, M., and Stephens, J., (2012), “Performance of Fly Ash Binder/Glass Aggregate
Concrete Structural Elements”, Poster, ASCE/SEI Structures Congress, Chicago, ILL, March,
2012.

Roskos, C., Berry, M., and Stephens, J., (2012), “Evaluation of Fly Ash Based Concretes Containing
Glass Aggregates for Use in Transportation Applications”. TRB 91st Annual Meeting, Washington,
D.C., Jan. 25, 2011.

Roskos, C., Berry, M., Stephens, J. and Cross, D., “Identification and Verification of Self-Cementing
Fly Ash Binders for Green Concrete”, World of Coal Ash, Denver, CO, May, 2011.

Berry, M. and Drake, G. (2011), “Shear Behavior of Glued Laminated Timber at Subfreezing Temperatures”,
Proceedings: Forest Products Society’s International Convention, Portland, OR, July, 2011.

Berry, M., Roskos, C., Cross, D., and Stephens, J. (2011), “Building Green: Development and Evaluation
of an Environmentally Friendly Concrete”, Proceedings, NSF CMMI Grantees Conference, Atlanta,
GA, January, 2011.

Shi, X., Liu, Y., Mooney, M., Berry, M., Hubbard, B., Nguyen, T.A. (2011), “Laboratory Investigation
and Neural Network Modeling of Deicer Ingress into Portland Cement Concrete and Its Corrosion Implications”.
TRB 90th Annual Meeting, Invited Presentation by the Corrosion Committee,Washington,
D.C., Jan. 25, 2011.

Berry, M., Schroeder, D., Larabee, B., and Stephens, J. (2010), “Building Green: Development and
Evaluation of an Environmentally Friendly Concrete (Structural Elements)”, Proceedings, ACI Fall
Convention, Pittsburgh, PA, October, 2010.

Berry, M., Cross, D., and Stephens, J. (2009), “Changing the Environment: An Alternative Green
Concrete Produced without Portland Cement”, Proceedings, WOCA Semi-Annual Meeting, Lexington,
KY, May, 2009.

Berry, M., Cross, D., and Stephens, J. (2008), “Performance of 100 percent Fly Ash Concrete with 100
percent Recycled Glass Aggregate”. Proceedings, TRB Annual Meeting, Washington D.C., January,
2009.

Berry, M. (2007), “Modeling Reinforced Concrete Bridge Columns,” Pacific Earthquake Engineering
Research Center’s Opensees Modeling Workshop, Richmond, CA, June 2007.

Eberhard, M.O. and Berry, M.P., “A Practical Performance Model for Reinforced Concrete Bridge Columns,” Proceedings, Caltrans Bridge Research Conference, California Department of Transportation, Sacramento, CA, November 2005.

Eberhard, M.O. and Berry, M.P., “A Simple Performance Model for Bar Buckling,” Proceedings, 5th US- Japan Workshop on Performance-Based Seismic Design Methodology for Concrete Buildings, Hakone, Japan, September 2003.

Berry, M.P. and Eberhard, M.O., “Column Deformation Demands at Bar Buckling,” Proceedings, 2003 Structures Congress, American Society of Civil Engineers, Seattle, Washington, May 2003.

Berry, M. and Eberhard, M.O. (2003), “Accuracy of Seismic Performance Estimates for Bridge Columns,”
ACI Spring Conference, Vancouver, Canada, March 2003.

Eberhard, M.O. and Berry, M. (2002), “A Simple Method to Estimate Column Deformation at Bar
Buckling,” Us-Japan Cooperative Program, Kyoto Grantees Meeting, Kyoto, Japan, October 2002.

Eberhard, M.O., Parrish, M. and Berry, M., “Deformation Demands at the Onset of Bar Buckling in Reinforced Concrete Columns,” Research Digest, Proceedings,Pacific Earthquake Engineering Research Annual Meeting, January 2002.

Berry, M.P., “RC Column Test Database.” Proceedings, Research Experience for Undergraduates Tri-Center Research Symposium, PEER, MCER, and MAE, Memphis, TN, August 1999.

 

Other Non-Journal Articles

Cross, D., Stephens, J., and Berry, M. (2010) “Sustainable Construction Contributions from the Treasure
State”, Concrete International, 32 (5), 41-46, May 2010.

Cross, D., Stephens, J., and Berry, M. (2009), “A Green Gem in the Treasure State”, Ash at Work,
Issue 1, 2009.

Technical Reports

Berry, M. (2011), “Seismic Design of Reinforced Concrete Bridge Columns: Chapter 3”, ACI Committee
341-A Report, March 2011.

Haraldsson, O., Eberhard, M. O., Stanton, J., and Berry, M. (2010), “Accelerating Bridge Construction
to Reduce Congestion,” Final Report, Transportation Northwest - TransNow, University of Washington,
December 2010.

Shi, X., Berry, M., Liu, Y., Zhengxian, Y., and Rajaraman, P. (2010), “Validating the Durability
of Corrosion Resistant Mineral Admixture Concrete”, Final Report California State Department of
Transportation, October, 2010.

Shi, X., Liu, Y., Mooney, M., Berry, M., Hubbard, B., Fay, L., Leonard, A.B. (2010), “Effect of Chloridebased
Deicers on Reinforced Concrete Structures.” Final Report Washington State Department of
Transportation. July 2010.

Berry, M.P. and Eberhard, M.O., “Performance Modeling Strategies for Modern Reinforced Concrete Bridge Columns,” Pacific Earthquake Engineering Research Center Report 2007/07, University of California, Berkeley, April 2008.

Berry, M.P. and Eberhard, M.O., “Damage Analysis,” Chapter 4 in “Application of the PEER PBEE Methodology to the I-880 Viaduct,” Ed. S.K. Kunnath, Pacific Earthquake Engineering Research Center Report PEER-2006-10, University of California, Berkeley, Feb. 2007, pp 45-54.

Berry, M.P. and Eberhard, M.O. “PEER Structural Performance Database User’s Manual,” Pacific Earth- quake Engineering Research Center Report, University of California, Berkeley, February 2004.

Berry, M. and Eberhard, M.O., “Damage Evaluation,” Chapter 6 in “I-880 Testbed Report,” Pacific Earthquake Engineering Research Center Report, University of California, Berkeley, February 2004.

Berry, M.P. and Eberhard, M.O. “Performance Models for Flexural Damage in Reinforced Concrete Columns,” Pacific Earthquake Engineering Research Center Report 2003/18, University of California, Berkeley, August 2003.

Ranf, R.T., Eberhard, M.O. and Berry, M.P., “Damage to Bridges during the 2001 Nisqually Earthquake,” Pacific Earthquake Engineering Research Center Report 2001/15, University of California, Berkeley, November 2001.

Presentations

Berry, M.P., “Modeling Reinforced Concrete Bridge Columns,” Pacific Earthquake Engineering Research Center’s Opensees Modeling Workshop, Richmond, CA, June 2007.

Berry, M.P. and Eberhard, M.O., “Column Deformation Demands at Bar Buckling,” ASCE Structures Congress and Exposition, Seattle, WA, May 2003.

Berry, M.P. and Eberhard, M.O., “Accuracy of Seismic Performance Estimates for Bridge Columns,” ACI Spring Conference, Vancouver, Canada, March 2003.

Eberhard, M.O. and Berry, M. P., “A Simple Method to Estimate Column Deformation at Bar Buckling,” Us-Japan Cooperative Program, Kyoto Grantees Meeting, Kyoto, Japan, October 2002.

Berry, M.P., “RC Column Test Database,” Research Experience for Undergraduates Tri-Center Research Symposium, PEER, MCER, and MAE, Memphis, TN, August 1999.